The ST third-party partner program will be on display. At that time, you can ask for your interest in the meeting.
The following is the information on the wearable device solutions on display:
1. Solution Name: Bluetooth 4.0 dual mode module (BT43H)
Solution introduction: BT43H is a Bluetooth 4.0 dual-mode module product with small size, fast speed and low power consumption. It can provide CD-quality high-quality audio output, with echo cancellation, noise reduction, and can simultaneously meet Bluetooth data and audio transmission.
2. Solution name: Bluetooth 3.0 audio module (BT24H)
Solution introduction: BT24H is a Bluetooth 3.0 version module product with low cost and low latency. This module provides high quality audio transmission with a latency of less than 25 milliseconds. Especially suitable for high-speed transmission products and audio products.
3. Scheme Name: WiFi Module (WF43)
Solution introduction: WF43 is a WiFi module product that supports 802.11b/g/n. It has the characteristics of small size, fast transmission speed, etc., and supports WiFi Direct, Wi-Fi Display, Soft Access Point and other functions. It is also a WiFi audio product that supports AirPlay technology.
Note: The above options 1-3 are provided by AmpedRF
4. Solution Name: Multi-function car bus communication platform (WF43)
Solution introduction: Based on the development and application of STM32 series automotive electronics and industrial control, a multi-functional vehicle bus communication platform was launched.
1. Super variety of bus interfaces. Two-way CAN Bus, LIN Bus, CGI Bus, IE Bus, etc.
2. STM32 Series Interface (GPIO) definition and standardization of the tail line interface.
3. The software program is productized and is directly applied to the product without modification.
4. Screw-free terminal block, LED, AV, dual serial port and other configurations for maximum convenience.
5, the program name: based on MOST fiber-based mobile phone interconnection program (Most-based H-Link System)
Solution introduction: Mobile phone interconnection scheme based on MOST fiber:
1. Fiber-based mobile phone interconnection solution.
2. Using the original car interface, the meter displays simultaneously.
3. Use the original car amplifier and radio to maximize cost savings.
4. Wirelessly connect and use all the functions of the phone at any time.
5. Non-destructive installation, no broken lines, professional joints directly docked.
6. Unlock the original car DVD playback speed limit, exclusive for luxury cars.
6, the program name: automatic car air conditioning controller (HVAC)
Program Description: Fully automatic car air conditioning controller:
1. The independently developed automatic air conditioning algorithm model perfectly realizes the original car air conditioning control, making it more in line with the usage habits, more humane and more comfortable.
2. All compatible with all configurations of the original car high, medium and low.
3. Full compliance with the requirements of the car rules, after strict high and low temperature testing.
4. In the long-term complex road condition test, the work performance is good and there is no bad phenomenon.
5. Directly docked with the original car, no need for patch cords, convenient and reliable.
6. Has good EMI and EMS characteristics and meets EMC standards.
7. The sleep current reaches the microamp level.
Note: The above scheme 4-6 is provided by Hiword
7, program name: wireless walkie-talkie program
Solution introduction: The wireless walkie-talkie solution is based on an application scheme of RT-Thread STM32 Professional Edition. Thanks to the high-performance STM32F407 Discovery kit, Ruiside's wireless walkie-talkie solution adopts Wi-Fi wireless transmission mode and collects on STM32F407. The voice signal is compressed into an Opus audio format and then passed over the Wi-Fi wireless network to any other STM32F407 Discovery end connected to the same network. The Wi-Fi module selected Ruiside's SPI interface Wi-Fi wireless network card RW009.
ZGAR AZ Vape Pods 5.0
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
From production to packaging, the whole system of tracking, efficient and orderly process, achieving daily efficient output. WEIKA pays attention to the details of each process control. The first class dust-free production workshop has passed the GMP food and drug production standard certification, ensuring quality and safety. We choose the products with a traceability system, which can not only effectively track and trace all kinds of data, but also ensure good product quality.
We offer best price, high quality Pods, Pods Touch Screen, Empty Pod System, Pod Vape, Disposable Pod device, E-cigar, Vape Pods to all over the world.
Much Better Vaping Experience!
Pods, Vape Pods, Empty Pod System Vape,Disposable Pod Vape Systems
ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.zgarpods.com