The ATM network can be divided into three parts: public ATM network, dedicated ATM network and ATM access network.
The public ATM network is an ATM network operated and managed by the telecommunications management department. It connects each dedicated ATM network and ATM terminal through a public user network interface. As a backbone network, the public ATM network should be able to guarantee the interoperability with the existing various networks, and should be able to support various existing services including ordinary telephones. In addition, there must be a full set of maintenance, management, and billing functions. At present, there is no commercial public ATM network, and the agreement on the public ATM network is constantly being improved.
The private ATM network refers to the ATM network within the scope of a unit or department. Because its network size is smaller than that of the public network and does not require management procedures such as billing, the private ATM network is the first to enter the practical ATM network, the new ATM Devices and technologies are often used first in the ATM private network. At present, the private network is mainly used for local area network interconnection or directly forming an ATM LAN to provide high-quality multimedia services and high-speed data transmission on the local area network.
Access to ATM network mainly refers to the use of ATM technology in various access networks to transmit ATM cells, such as ATM-based passive optical network (APON), hybrid fiber coaxial (HFC), and asymmetric digital loop (ADSL) And wireless access technology using ATM.
2. ATM main interface
1. UNI (User-Network Interface)
UNI is the user network interface in the ATM network. It is the interface between the user equipment and the network and directly faces the user. The UNI interface defines the interface standard of the physical transmission line, that is, what physical line and interface the user can connect to the ATM network, and also defines the ATM layer standard, UNI signaling, OAM function and management function. According to the location of the UNI interface, it can be divided into public network UNI and private network UNI (PUNI). The definition of these two UNI interfaces is basically the same, but PUNI does not need to be as much as the public network interface. Considering strict consistency, PUNI has more interface forms, more flexible and faster development.
2. NNI (Network to Network / Network Node Interface)
NNI can be understood as a network node interface or an interface between networks / networks, generally an interface between two switches. Like UNI, the NNI interface also defines the specifications of each layer such as the physical layer, ATM layer, and signaling. Function, but because the NNI interface is related to the routing problem connected to the network, the routing method is specifically explained. Similarly, the NNI interface is also divided into the public network NNI and the private network NNI (PNNI). The difference between the public network NNI and PNNI is still quite large. For example, the public network NNI signaling is broadband ISDN of signaling system No. 3 and No. 7 The user part is B-ISUP, while PNNI is completely based on the UNI interface and still uses the UNI signaling structure.
3. B-ICI (BISDN Inter-Carrier Interface)
B-ICI is defined as an interface between two public ATM networks and provides connections for UNI interfaces that belong to two operators respectively. Its definition is based on the NNI interface and is characterized by supporting multiple service transfers between different networks, including Cell-based PVC-based services, PVC-based frame relay services, circuit simulation services, SMDS and SVC services, etc.
4. DXI (Data Exchange Interface)
DXI is defined between the digital terminal equipment DTE and the digital connection equipment DCE. DTE is connected to DCE through DXI and then connected to the ATM network through the ATM UNI interface. DCE completes the adaptation process of data terminals that do not meet the ATM standard to ATM Equivalent to terminal adapter.
5. FUNI (Frame Based UNI Interface)
The meaning of FUNI is similar to that of DXI. FUNI has completely moved the ATM adaptation function into the switch. FUNI frames are transmitted between the terminal and the ATM switch, so compared with the DXI interface based on the cell, FUNI has a higher access line effectiveness.
Anti-Twisting Braided Steel Rope
Anti-Twisting Braided Steel Rope
MARSHINE Anti-Twisting Braided Steel Rope is Applied to mechanical pulling and tensioning release conductors as pulling rope or leading rope.
Feature: Braided 1960 Mpa high-strength galvanized steel wire .rotation resistance during pulling .
The specification and length of the MARSHINE steel wire rope can be customized according to your request.
MARSHINE anti-twisting rope is available with several diameters that depend on the type of the machine. Such as there are diameter of 7, 11, 13, 15, 18, 20-42m etc.
Ningbo MARSHINE Power Technology Co., Ltd. is a professional engaged in the development, design and manufacture of power engineering construction equipment and tools.
MARSHINE company produces circuit construction tools, including foundation construction, tower group lap. Wiring structure. Cable construction, cable construction, mobile knife mill, insulated overhead cable and high voltage cable stripper, all kinds of aluminum alloy pull rod, guide rail, grounding device, high strength shackle, ratchet wrench and pointed wrench, double hook tight line device, lifting pulley, nylon wheel and aluminum wheel, punching machine ect.
MARSHINE continues to carry forward the enterprise spirit of "integrity, development, innovation" and strive for the prosperity and development of the electric power industry.
Welcome to contact MARSHINE and reach cooperation, thank you!
Anti-Twisting Braided Steel Rope,Anti Twisting Steel Wire Ropes,Anti Twist Wire Rope,Anti Twisting Braided Steel Rope
MARSHINE , https://www.puller-tensioner.com