A MOCVD price of 35 million yuan, gross margin of more than 45%, domestic equipment manufacturers also began research and development
On March 17, Sanan Optoelectronics announced that its subsidiary Anhui Sanan Optoelectronics had paid 85 million yuan as a deposit for land use rights in the development zone of Wuhu City. The day before, the company’s announcement stated that it plans to issue additional 20 million to 53 million shares of non-public offerings and raise 2.98 billion yuan for the Anhui Sanan Optoelectronics Industrialization Project.
This means that the Sanan Optoelectronics Wuhu LED production base with a total investment of 12 billion yuan has been launched. However, this is only one aspect of the Chinese LED investment boom. On February 1st, Dehao Runda (002005.SZ) Wuhu LED Optoelectronic Industry Base with a total investment of 6 billion yuan has already started.
"Everyone is snapping up MOCVD equipment (LED chip manufacturing equipment), and the manufacturer's delivery cycle has been scheduled for next year." iSuppli China analyst Gu Wenjun told the "First Financial Daily" yesterday that the domestic demand for MOCVD has reached nearly this year. Hundreds of units far exceed the supply of MOCVD equipment manufacturers.
It is reported that Aixtron and Veeco two MOCVD equipment factories monopolize nearly 90% of the global MOCVD equipment market, and their respective annual production capacity is only about 150 units, and most of them will be delivered to Korean LED manufacturers.
The gap in domestic MOCVD equipment is also rapidly expanding due to the sudden fanatic LED fever.
According to Sanan Optoelectronics Investment Plan, 200 MOCVD equipment will be purchased, of which 100 MOCVD equipment will be purchased in the first phase. Dehao Runda expects to receive 10 MOCVD equipment in June. If the production is smooth in the early stage, MOCVD equipment will be gradually increased to 100 units in the future. At the end of February, the Xuerui Optoelectronics LED epitaxial chip project launched in Nanhai, Foshan, is also expected to have more than 100 MOCVDs.
However, what is embarrassing is that Chinese companies are still in the investment period of LED business losses, and overseas MOCVD equipment manufacturers have earned a lot of money.
A few days ago, Veeco's fourth-quarter 2009 financial report showed that in the fourth quarter of last year, the company's revenue was 146 million US dollars, a 48% increase from the previous quarter. The overall gross profit margin was 45%, an increase of 3.6 percentage points from the previous quarter and an increase of 5.5 compared with the same period last year. %.
Veeco CEO John Peeler said that the global demand for MOCVD equipment will reach 400~500 units this year. The company plans to expand its production capacity. It is estimated that 45 units will be produced in the first quarter, 70 units will be produced in the second quarter, and 120 units will be upgraded in the fourth quarter. .
"Aixtron and Veeco are deliberately causing this situation of short supply, in fact, in order to monopolize the price." Zhang Xiaofei, CEO of Gaogong LED, revealed that many Taiwanese LED manufacturers are moving MOCVD equipment to the mainland or selling second-hand LEDs because of the attractive LED policy in the mainland. MOCVD equipment, "The problem is that the number of used MOCVD equipment in Taiwan is also very limited."
Perhaps, Guangdong Zhaoxin Group is the last hope to ease the tight supply and demand of mainland MOCVD equipment.
In mid-January, Guangdong Zhaoxin Group announced the launch of the prototype of the first MOCVD equipment in the mainland. The company expects to enter mass production after May. “The product data is currently being tested.†A senior executive of Guangdong Zhaoxin Group said it is not convenient to disclose further content.
However, industry veterans pointed out that Guangdong Zhaoxin Group can successfully mass-produce MOCVD equipment as scheduled, which is still unknown. Because, before the mainland has developed a number of MOCVD equipment, but did not introduce mass production in the end, the reason is that the technical threshold is too high, otherwise this market will not be controlled by the two companies.
Micro Data Line is a portable version of the Data Line 2.0 standard. The Micro data cable has a smaller interface than the Mini data cable used in some mobile phones, and is the next generation of Mini data cable specifications. This data line supports OTG and is 5PIN like MINI data line. Micro-usb supports OTG and, like Mini-USB, is also 5PIN. The definition of Micro series includes Micro-B series slots for standard equipment; Micro-ab slots for OTG devices; Micro-a and micro-B plugs, and cables. The Micro series is unique in that they include a stainless steel case that can be inserted and removed for 10,000 times. Compared with the Usb Cable Type C, the Type-C interface is plugable, but the Micro USB interface is not.
Micro-usb connectors are smaller and space-saving than standard USB and Mini-USB connectors, with up to 10,000 plug and remove life and strength, and a blind plug structure design. The Micro-USB standard supports the OTG functionality of current USB, that is, in the absence of a host computer (for example, a personal computer). Data can be transferred directly between portable devices, compatible with USB1.1 (low speed: 1.5Mb/s, full speed: 12Mb/s) and USB 2.0(high speed: 60Mb/s). Provides data transmission and charging at the same time, especially suitable for high-speed (HS) or higher data transmission, is the best choice for connecting small devices (such as mobile phones, PDAs, digital cameras, digital camcorders and portable digital players, etc).
Micro Usb Cable,Usb Charging Cable,Micro Usb C Cable,Braided Micro Usb Cable
Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com