Model NO.: BDTX-0017
Condition: New
Height: According to Your Request
Platform: 1, 2, 3 All Available
Galvanized Lattice Communication Tower: Roof Top Communication Tower
Galvanized Roof Top Tower: Angle Steel Communication Tower
Roof Top Microwave Communication Tower: Decoration Steel Tower
Metal Protection: Hot Dipped Galvanized
Landscape Steel Tower: Roof Top Steel Tower
GSM Communication Tower: GSM Telecom Steel Tower
Communication Tower Galvanized: Tubular Communication Tower
Wind Speed: According to Your Request
Trademark: Baode
Transport Package: Safety Packing
Specification: CE, ROHS, FCC
Origin: Yangzhou Jiangsu
HS Code: 940540900
Model NO.: BDTX-0017
Condition: New
Height: According to Your Request
Platform: 1, 2, 3 All Available
Galvanized Lattice Communication Tower: Roof Top Communication Tower
Galvanized Roof Top Tower: Angle Steel Communication Tower
Roof Top Microwave Communication Tower: Decoration Steel Tower
Metal Protection: Hot Dipped Galvanized
Landscape Steel Tower: Roof Top Steel Tower
GSM Communication Tower: GSM Telecom Steel Tower
Communication Tower Galvanized: Tubular Communication Tower
Wind Speed: According to Your Request
Trademark: Baode
Transport Package: Safety Packing
Specification: CE, ROHS, FCC
Origin: Yangzhou Jiangsu
HS Code: 940540900
Long Lifetime Telecom Pole Steel Tower with Lighting FunctionAs a engineering and construction company of communication tower, Baode Lighting also provides Monople Communication Tower, 3 Legs Lattice Antenna Tower, 4 Legs Tubular Telecom Tower for our potential customers.
As a professional manufacturer of steel towers, we are equipped with aadvanced equipments that needed in the production process. At the same time, the advanced equipments make sure our high efficiency and then our delivery time which is critical for our customers.Â
So you are always welcome to contact us if you need fabrication or deisgn of different types towers with the parameters if need design as following:
1. Height of tower
2. Type of tower
3. Materia of tower
4. Quantity of tower
5. Details of loads
6. Wind speed applicableÂ
7. Nos and the place of the platforms on the tower.
8. Nos of the antenna.
9. Any other requests.
Specifications:
Shape | Angle or pipe |
Material: | Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
Height:Â | 9-100m |
Voltage | 10KV-500KV |
Welding Standard | AWS (American Welding Society )Â D 1.1 CO2 welding or Submerged arc auto methods |
Appearance | Hot DIP Galvanized |
Certificate | ISO 9001: 2008, etc |
Welding method | CO2 welding or submerged arc welding |
Strength of pole | Against earthquake of 8Â grade |
Wind Speed | Against 160 Km/Hour. 30 m /s |
Surface treatment | Hot DIP galvanized Following ASTM A 123, or any other standard by client required. Thickness< 5mm, galvanization thickness≥ 460G/M² (65um) Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) |
Packages | Packing with plastic paper or according to client's request. |
Why us:
Â
One-stop Service |
Â
Vertically Integrated Production System |
Â
15 Years' Manufacturing Experience |
Â
Large Factory with Complete Facility |
Â
Advanced Technology |
Â
Cost Efficiency |
Â
Factory outlet |
Our Services
WARRANTY |
Â
INSTALLATION |
Â
SPAREÂ PARTSÂ POLY |
Transaction amount $1000 ~ $19,999 | 0.5% spare parts |
Transaction amount more than $19,999 | 1% spare parts |
AFTER-SALE SALES |
2:BAODE promises to respond with customer's questions within 24 working-hours.
Â
MAINTENANCE |
Â
Typical maintenance schedule:
1:Every Week: Inspect solar street lighting to ensure all the lights are working. If there are lights which are not lit, perform analysis to understand cause and conduct repairs.
2:Every Two Months: Inspect solar street lighting panels and clean ones which are covered with dust or sand. The best way to clean the panels is with a brush at the end of a long pole. Cares should be taken to avoid damaging the solar panels.
3:Every Five to Seven Years: Replace the solar street light batteries if the voltages drop below normal levels. The battery has an expected life of five-seven years.
Â
ODMÂ &Â OEMÂ SERVICE |
Payment Term
30% in advance and 70% before shipment for our products Long Lifetime Telecom Pole Steel Tower with Lighting Function
As a engineering and construction company of communication tower, Baode Lighting also provides Monople Communication Tower, 3 Legs Lattice Antenna Tower, 4 Legs Tubular Telecom Tower for our potential customers.
As a professional manufacturer of steel towers, we are equipped with aadvanced equipments that needed in the production process. At the same time, the advanced equipments make sure our high efficiency and then our delivery time which is critical for our customers.Â
So you are always welcome to contact us if you need fabrication or deisgn of different types towers with the parameters if need design as following:
1. Height of tower
2. Type of tower
3. Materia of tower
4. Quantity of tower
5. Details of loads
6. Wind speed applicableÂ
7. Nos and the place of the platforms on the tower.
8. Nos of the antenna.
9. Any other requests.
Specifications:
Shape | Angle or pipe |
Material: | Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
Height:Â | 9-100m |
Voltage | 10KV-500KV |
Welding Standard | AWS (American Welding Society )Â D 1.1 CO2 welding or Submerged arc auto methods |
Appearance | Hot DIP Galvanized |
Certificate | ISO 9001: 2008, etc |
Welding method | CO2 welding or submerged arc welding |
Strength of pole | Against earthquake of 8Â grade |
Wind Speed | Against 160 Km/Hour. 30 m /s |
Surface treatment | Hot DIP galvanized Following ASTM A 123, or any other standard by client required. Thickness< 5mm, galvanization thickness≥ 460G/M² (65um) Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) |
Packages | Packing with plastic paper or according to client's request. |
Why us:
Â
One-stop Service |
Â
Vertically Integrated Production System |
Â
15 Years' Manufacturing Experience |
Â
Large Factory with Complete Facility |
Â
Advanced Technology |
Â
Cost Efficiency |
Â
Factory outlet |
Our Services
WARRANTY |
Â
INSTALLATION |
Â
SPAREÂ PARTSÂ POLY |
Transaction amount $1000 ~ $19,999 | 0.5% spare parts |
Transaction amount more than $19,999 | 1% spare parts |
AFTER-SALE SALES |
2:BAODE promises to respond with customer's questions within 24 working-hours.
Â
MAINTENANCE |
Â
Typical maintenance schedule:
1:Every Week: Inspect solar street lighting to ensure all the lights are working. If there are lights which are not lit, perform analysis to understand cause and conduct repairs.
2:Every Two Months: Inspect solar street lighting panels and clean ones which are covered with dust or sand. The best way to clean the panels is with a brush at the end of a long pole. Cares should be taken to avoid damaging the solar panels.
3:Every Five to Seven Years: Replace the solar street light batteries if the voltages drop below normal levels. The battery has an expected life of five-seven years.
Â
ODMÂ &Â OEMÂ SERVICE |
Payment Term
30% in advance and 70% before shipment for our products
110KV Distribution Power Transformer
110KV Transformer,Power Transformer,Distribution Transformer
Bao Ding Tian Wei Group Transformer Co., Ltd. , http://www.jspowertransformer.com