Electric motors differ from conventional industrial motors in that they require higher efficiency over a wider range of speeds and new test methods for efficiency testing under new conditions.
In the past two years, the new energy automobile industry has flourished, and more and more enterprises have joined the competition in this industry. As the core driving motor and driver in electric vehicles, their performance directly determines whether the vehicle is competitive. Since Faraday discovered the principle of electromagnetic induction, the motor has developed nearly two hundred years from the very beginning of the prototype, and manufacturers of motor production can be seen everywhere in China.
However, ordinary motors tend to operate only at steady state, and usually only require measurement of efficiency at steady state. For the electric motor, we can easily think of the frequent start, acceleration, braking, and rapid change of the speed in the actual situation. The working range covers almost the speed range. Therefore, for the electric motor, it must be required to rotate at a wider working speed. High efficiency in the range of moments in order to obtain a driving experience and energy consumption indicators.
At present, the national standard for motor testing of electric vehicles mainly comes from the test standards and methods of traditional industrial motors. It is often not enough for the current stage of EV motor testing, and some leading manufacturers in the industry will also develop their own test methods.
The most mainstream of these methods is to build the simulated real EV motor operating conditions in the laboratory. According to the real-time data recorded during the test, the average efficiency of the motor and the driver and the real-time dynamic efficiency are calculated, and the performance of the motor and the driver are analyzed and evaluated.
At present, there are three types of vehicle driving conditions in the world: the US USDC, the European EDC and the Japanese JDC. As a regionally sold vehicle, the cars sold in various countries will be tested for different conditions. In China, there is no standard working condition for manufacturers to test, so building typical working conditions is the first step for every EV motor manufacturer.
There are two common methods for constructing typical working condition data. The first one is to obtain a simulation model of the driving resistance of the vehicle, adjust various parameters, and calculate the real-time torque of the motor. The second type: through the vehicle data acquisition system, will be in various Real-time data running on the road is recorded.
After obtaining the working condition data, the road simulation test module in the MPT motor test platform is used to run in the speed mode, and the speed command is set according to the working condition data. When the torque mode is used, the torque command is also set according to the working condition data. At the corresponding time point, the corresponding load motor speed and the measured motor torque are applied, and the MPT1000 automatically completes the test of the working condition of the motor and the motor under test. At the same time, MPT synchronously records the basic parameters such as voltage, current, power, temperature and waveform of the motor under test, and calculates the instantaneous efficiency in real time and the average efficiency of the selected interval.
What is a Mobile Phone Back Skin?
The Mobile Phone Back Sticker is an interesting way to decorate the phone, which can add style to the mobile phone while also providing a small amount of protection. They are different from Mobile Phone Cases, which usually pay more attention to function than style. The Back Sticker is directly attached to the surface of the phone, which can achieve a more unique appearance than most phone cases.
Sometimes called skin or Mobile Phone Case, the typical mobile phone Back Film is made of vinyl products. The material provides a glossy finish and can use a variety of colors in the design. JJT can provide you with a variety of solid colors or use a variety of different patterns and color combinations of skins. In all cases, the Back Film is close to the phone body and will not interfere with any functions of the phone.
One of the advantages of using decorative skins is that they will not be permanently attached to the phone. This means that you can choose several different Back Skin Sticker and change the appearance of the phone according to the occasion. For example, they can be used to decorate mobile phones during holidays, seasons of the year, or special events such as birthdays, wedding receptions, and any other imaginable occasions.
Whether you want to get gorgeous, high-density, high-quality skin for your smartphone, then you need 3D Relief Back Sticker to fit your phone perfectly. Abandon the bulky Phone Case and wrap the smartphone in a high-quality PVC Back Sticker.
The Back Sticker not only adds texture to your smartphone for a strong anti-skid feel. It also hides the cracks on your back smartphone without having to add a bulky case or pay a huge sum to replace it.
Precise cutting and long-lasting durability: The Back Sticker Cutting Machine can perform precise cutting, is compatible in all situations, and the hole position is accurate, which is very suitable for your equipment.
Zero air bubbles, no residue: The Back Skin has excellent air permeability and a slim appearance, and will not leave any residue after being torn off, so it will not affect the wireless charging function.
Anti-scratch and anti-fingerprint: Mobile Phone Back Wrap uses PVC environmentally friendly materials to protect your phone from daily scratches, dust, scratches and normal wear and tear. Provide a protective back for the phone (including curved edges).
Mobile Phone Back Stickers,3D Relief Back Sticker,Back Film Cover Sticker,Screen Protector Back Film Cutting Machine
Shenzhen TUOLI Electronic Technology Co., Ltd. , https://www.tlhydrogelprotector.com