BSMJ cylindrical low-voltage self-healing power capacitor is mainly used in the power system of 50/60Hz to improve the quality of power grid, enhance the power factor and reduce the line loss.
Featurns:
1-Â The capacitor is filled with special protective dielectric, which doesn't leak and environmental friendly to avoid the pollution.
2-Â Excellent self-healing property makes the capacitor self-repair quickly and restart to work in case that part of the dielectric caused by over voltage breaks down.
3-Â Over-voltage snap can prevent the capacitor from accidents at the end of service life.
4- New, safe and reliable terminal can b connected conveniently which adopts hidden design so as to prevent accidental touch and it also has a unique structure.
Technical Parameter:
Rated voltage:230-900VAC, conventional low pressure 400,440,525,690V
Rated capacity: 3-40KVAR
Capacitance tolerance: the ratio between maximum and minimum value of capacitance which are measured at any two terminals of the three-phase capacitor should be no more than 1.08
Loss angle tangent: Tanδ≤0.2%
Executive standard: GB/T12747-2004; IEC60831
Model and dimension:
 General Decription:
BSMJ cylindrical low-voltage self-healing power capacitor is mainly used in the power system of 50/60Hz to improve the quality of power grid, enhance the power factor and reduce the line loss.
Featurns:
1-Â The capacitor is filled with special protective dielectric, which doesn't leak and environmental friendly to avoid the pollution.
2-Â Excellent self-healing property makes the capacitor self-repair quickly and restart to work in case that part of the dielectric caused by over voltage breaks down.
3-Â Over-voltage snap can prevent the capacitor from accidents at the end of service life.
4- New, safe and reliable terminal can b connected conveniently which adopts hidden design so as to prevent accidental touch and it also has a unique structure.
Technical Parameter:
Rated voltage:230-900VAC, conventional low pressure 400,440,525,690V
Rated capacity: 3-40KVAR
Capacitance tolerance: the ratio between maximum and minimum value of capacitance which are measured at any two terminals of the three-phase capacitor should be no more than 1.08
Loss angle tangent: Tanδ≤0.2%
Executive standard: GB/T12747-2004; IEC60831
Model and dimension:
Â
NTC temperature surface mount sensors are non intrusive type sensors consisting of a probe section designed for mounting to flat or curved surfaces.
Cables can be supplied with insulation or jacket in PVC, Teflon or Silicon. Some cables are also available with a stainless steel over-braid or stainless steel armor for additional protection.
With the properties of easy installation, surface temperature measurement, surface mount type NTC Temperature Sensor has been used to power supply, radiator, electric motor and generator. Temperature range is from -30°C to 105°C.
Surface Mounting Sensor
Surface Mounting Sensor,Surface Mount Sensor,Sensor Radiator,Surface Mount Ntc Sensor
Feyvan Electronics Technology Co., Ltd. , http://www.fv-cable-assembly.com