After so many years of experience with the lighting manufacturers, I often feel that the lighting manufacturers do not want to buy a good LED power supply, but do not know how to identify the LED power supply is good, but also worry about whether to spend a high price to buy low quality LED power supply . Therefore, as a lighting manufacturer, the most difficult feedback is to buy LED power supply, because the quality of the power supply is difficult to detect, aging in its own factory for 4 hours, and some even aging for 24-72 hours, but these aging products are often in A 5% or higher ratio is bad for 3-6 months of shipment. Often these bad conditions, the lighting manufacturers engaged in miserable, to make a customer lose a customer.
So if you identify the quality of the LED power supply? We can identify from the following points:
First, the driver chip --- IC
The core of the driving power supply is the IC, and the quality of the IC directly affects the entire power supply. The driver ICs of Dachang are all purchased by the crystal garden to find a large packaging factory to package. The driver IC technology of the small factory is to directly copy the drive design of the large factory to find a small package factory to package, which can not guarantee the whole batch of ICs. Consistency and stability, resulting in inexplicable failure of the drive power after a period of use. Therefore, the IC on the LED power supply refuses to be polished, so that the lamp manufacturer can understand the cost of the IC solution and the accounting driver, and purchase the power product at a reasonable price.
Second, the transformer
The control chip can be regarded as the brain center of the power supply, and the power, temperature resistance, etc. are the transformers. The transformer is responsible for completing the "AC-Magnetic-DC" and the energy overload will saturate the bomber. The core of the transformer is the core and the wire package.
Core quality is the core of the transformer, but like porcelain, it is extremely difficult to distinguish. The simple appearance is distinguished as: the appearance is crisp, dense and bright, and the back side is polished to the top. At present, the magnetic core used by Shanghai Nuoyi is a mold-opening PC44 core, which ensures high efficiency of the power supply.
The wire package is made of copper wire winding. The quality of the copper wire is the key to affect the life of the transformer. The same length of copper-clad aluminum wire is 1/4 of the price of pure copper wire. Due to the cost pressure, the transformer manufacturer often mixes the transformer of the copper-clad aluminum wire package inside. As a result, the burnout failure occurs when the temperature of the transformer rises, resulting in failure of the power supply and the entire lamp. Therefore, many lamps, especially the built-in power supply lamps, often ship for about 6 months. And how to distinguish whether this copper wire is pure copper wire or copper clad aluminum? Use a lighter to ignite it, and quickly burn it out to be copper-clad aluminum. It is also possible to measure the resistance of the coil for identification.
Third, electrolytic capacitors and chip ceramic capacitors
The quality and life requirements of the input electrolytic capacitors may be known to everyone, and everyone pays great attention to them. However, people often ignore the quality requirements of the output capacitor. In fact, the life of the output capacitor has a great influence on the life of the power supply. The output has a switching frequency of up to 60,000 times per second, which causes the parasitic resistance of the capacitor to heat up, producing a scale-like substance, and finally the electrolyte heats up and bursts. Recommended output electrolytic capacitor: LED dedicated electrolysis, the general model starts with L. At present, our output electrolysis is Aihua's high-life electrolytic capacitor.
Ceramic capacitors: The material is divided into X7R, X5R and Y5V, and the actual capacitance of Y5V can only reach 1/10 of the actual value. The nominal capacitance only refers to the operation at 0 volts. Therefore, this tiny chip resistor, poor options will also lead to cost price differences and greatly shorten the life of the power supply.
This series features transparent LED screens, which are suitable for various indoor places and various stores, especially in storefronts with floor-to-ceiling glass windows. Installing the transparent screen against the glass wall has a very good effect. When the display is turned off, the audience can watch the indoor environment from the outdoors, and when the display is turned on, they can directly watch the content played on the display.It not only preserves the visibility in the store, but also can effectively display advertising videos to the other party, which is very practical.
Transparent Led Screen,Led Wall Display,Building Led Display Panel,Sport Led Screena
Guangzhou Cheng Wen Photoelectric Technology Co., Ltd. , https://www.leddisplaycw.com