Centralized driver installation and wiring

1. Centralized drive installation

The centralized driver adopts a standard rail-mounted installation, each of which can provide 4-6 drive outputs (drive objects include lights, electrical appliances, electronically controlled locks, electric curtains, central air conditioning, fresh air systems, floor heating, etc.). The centralized driver also has three or six dry contact input interfaces, which can be connected to any third party ordinary switch panel, so that the ordinary switch panel can function as an intelligent control panel; at the same time, the centralized driver also has output bypass emergency manual operation and product failure. Self-diagnosis indication function.

There is a row of emergency manual buttons under the label cover of the centralized driver, allowing the user to forcibly activate the corresponding lights or appliances through various emergency manual keys. The emergency manual button can also play a role in auxiliary debugging. For example, after the line of the load is connected, if the system is not connected to the network or the driver itself has not sent the working power, the emergency manual button can be used to turn the corresponding load on and off (of course The precondition is that the power of the load is normal) to judge whether the wiring is normal and determine the name and installation position of the load.

The centralized driver receives the control of the multi-function panel through the communication bus, so that the multi-function panel does not need to be provided with a high-voltage driver module, and the control object of each interface of the multi-function panel can be defined by the management software, and the panel operation and the high-voltage drive can be completely separated. , To achieve the purpose of standardizing strong electric wiring, using safety, and facilitating future maintenance.

2. Six way centralized driver (CRM-QD/6J) wiring method

(1) Wiring diagram of six-way centralized driver (CRM-QD/6J) to control light/electrical, electrically controlled lock or floor heating.

(2) Wiring diagram of six-way centralized driver (CRM-QD/6J) for controlling electric curtains.

(3) Wiring diagram for six-way centralized drive (CRM-QD/6J) to control fresh air.

(4) Wiring diagrams for the six-way centralized driver (CRM-QD/6J) controlling the central air conditioner.

3. Four way centralized driver (CRM-QD/4J) wiring method

(1) Wiring diagram for four-way centralized driver (CRM-QD/4J) to control light/electrical, electrically controlled lock or floor heating.

(2) The wiring diagram of the four-way centralized driver (CRM-QD/4J) controlling the application and moving the curtain.

(3) The wiring diagram of the four-way centralized driver when controlling fresh air.

4. Four-way centralized driver (CRM-QD/4K)

The wiring diagram for the four-way centralized driver (CRM-QD/4K) for controlling incandescent lamps (dimmable).