LED epitaxial faucet factory Jingdian announced last night that it would prepare to buy tens of thousands of treasury shares with a ceiling of 34.9 billion Taiwan dollars. The company’s implementation of treasury stocks is precisely for the purpose of retaining talents. Jingdian pointed out that in order to motivate staff morale and enhance employee focus, the purchase of common stock will be transferred to employees.
It is understood that the mainland's development of LED upstream core technology is just around the corner, not only actively cultivating talents, but also launching overseas talent recruitment plans. The mainland's wave of overseas cornering will be more active than the previous wave (2010). Taiwan LED Leijing faucet factory, the last wave of mainland LED digging angle action, crystal power has also become the primary target, in order to prevent this blockage and then lose talent, even if the LED industry is still in an oversupply situation, Jingdian also started to open The layout of the talents.
Recently, Crystal Power has officially announced the development of high-voltage LED dies with 216 lumens of warm white light per watt, and its luminous efficiency is even the highest in the world. According to Jingdian, this product will effectively reduce customer cost, compared with the current luminous efficiency of the same grade. Compared with 130-140 lumens, it is equivalent to a 66% improvement in performance. The current laboratory to actual production is about 3 to 6 months.
In the fourth quarter of this year, Jingdian’s performance is expected to be better than expected. The legal person is optimistic that this season has the opportunity to change from negative growth to positive growth. Jingdian also predicted that the loss and cost in the fourth quarter will be less than that in the third quarter as early as the third quarterly report. The profit in the single season can be better than the previous season.
Â
Features: 12v Dc geared motor drive precision, small volume, large torque, low noise, durability, low energy consumption, customized power design,easy installation, easy maintenance;Simplify design and save space.
12V Dc Gear Motor, namely Gear Reduction Motor, is based on ordinary Dc Motor, coupled with gear reduction gearbox.
The gear reducer is used to provide low speed and large torque.
At the same time, the gearbox with different deceleration ratio can provide different speed and torque.
Generally different industries, using different power dc motor, generally adopt custom parameter design pattern.
Method of use: the best stable in horizontal plane, installed on the 12v dc gear motor output shaft parts, cannot use a hammer to knock,knock prone to press into the 12v dc gear motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
12v Dc geared motors should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
12v Dc geared motors should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of 12v Dc geared motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
12V Dc Gear Motor,Dc Gear Motor 12V,12V Gear Motor,12V Dc Gear Motor 30 RPM
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com