LBT launches the first LED module design control component to provide dimmable selection

Topic: Technology Day, Light-Based Technology (LBT)'s first LED module design control component LB4TM series - Triac Dimming. The biggest benefit of this product is the solid state lighting system industry. In terms of application, the wall dimming device is the most used end.

The reason that Triac dimming is an important evolution for solid-state lighting systems is the ever-changing market demand. In North America, with approximately 110 million homes, the Triac dimming component is the most popular lighting controller in the past 25 years. In addition, the brightness of the simple fluorescent strips used by people in the early days could not be controlled by the dimmers on the wall, which hindered the popularity of the power-saving lamps. In any case, in order to enable strict control of energy applications, LED components must have dimming capabilities. Triac dimmers are very simple and inexpensive to install. From the beginning of the design, LED products and LED dimmer LB4TM are combined inside the product. After the completed module is installed on the wall, people can adjust the light intensity according to personal preference. Alternatively, you can tune the light to the incandescent lamp you used to use, or personalize it to a variety of other functions as you wish.

Although the market is promising for the prospect of Triac dimmers, there is currently no set of standards for LED brightness control specifications. After ten or even twenty years, how will the home's dimming control develop? Triac controllers require less soldering and lower hardware costs than wireless controllers. The buyer can easily understand how to use the dimmer, and the installer can also locate it in a specific place according to their own needs. Many large companies have started using this kind of lighting controller in their factories to save electricity. Consumption.


Figure: LB4TM circuit

Differential Pressure Sensor

Differential pressure sensor (DPS) is a sensor used to measure the difference between two pressures. It is usually used to measure the pressure difference between the front and rear ends of a certain equipment or component.

Looseness often occurs during installation. The transmitter is connected with the three valve manifold. The bolts should be tightened diagonally. Generally, they cannot be locked at one time. The sealing ring should be densified during the installation of the three valve manifold.

Differential Pressure Sensor,Differential Pressure Transmitter Sensor,Differential Air Pressure Sensor,Adjustable Differential Pressure Sensor

Taizhou Jiabo Instrument Technology Co., Ltd. , https://www.taizhoujiabo.com

Posted on