Three Tips for Renovating Smart Home for New Homes

The smart home industry is very hot at present. After experiencing the high-tech experience of smart homes, people are hoping to install a smart home at home. For those friends who have just bought a house in the renovation stage, Xiao Bian has given suggestions for smart home decoration. Of course, this is only for new houses. If it is an old house that needs to be renovated, and the owner has money in hand, you can also look at it.

1, avoid buying a special controller

Due to the phenomenon of dwelling in large and medium-sized cities in China, for this phenomenon, domestic smart home devices are strongly demanded to be reduced in size, reduced in complexity, easily replaced, and even portable to some extent. For example, like the box-type air conditioners popular in Hong Kong's cage houses at the end of the last century, there are also water tank type water purifiers in China that can be installed anywhere in the kitchen without being installed in the kitchen water pipes. In addition, the compact Bluetooth speaker is also very popular.

This makes any device that exists specifically for the control of smart homes likely to become boring and unpleasant in the future. The easiest way is to always use mobile phones and computers. Almost all smart home standards on the market have to be compatible with smart phones, so do not choose products that do not support cell phone control.

If there is a desktop computer at home as a control center, and a public computer that can be used as a family member at ordinary times, this kind of "prehistoric" experience of the 1990s is also good. The big screen allows you to really feel at home, try it out.

2, choose the most common standard

There are many current smart home communication protocols. It is very difficult to find a communication protocol that can be applied to all smart home devices. However, in order to install a smart home system, you have to choose one, and then choose the most widely used one. Well, if the choice is a wireless smart home system, then the choice of Zigbee protocol is a good choice, if the choice is a wired smart home system, then the bus technology is also a very good choice.

3, choose the "stupid" terminal, use the "smart" hub to control

During the renovation process, it is best not to turn on any smart features in your home router, so that your mobile phone or a computer that is always on at home is the only terminal that can control home smart devices. Don't want to bring smart features to anything in your home. It's very likely to cause trouble for you.

In short, it is to choose a smart home system that can be controlled by a mobile phone or a computer. The smart host gateway is controlled by a mobile phone or a computer. Other smart home devices allow them to transmit signals through a host gateway to achieve intelligence. This is also the direction of development of the current smart home industry, smart single product gradually to the smart home system transition.

The above three suggestions are given for the new home decoration smart home, if you want to decorate the old house can also be used as a reference. Xiaobian's proposal for the decoration of the old house is the best choice for wireless smart home systems, because the old house decoration wired smart home needs to re-chisel wall wiring, the cost is too high. Of course, you don't need to care about those "sluts."