It is composed of an insulating base, an insulating partition, and wires, and the insulating base is integrated.
The terminal fittings are seated on the insulating base and placed in the insulating partition. The terminal fittings include wire clips, screws, nuts, and support frames. The support frames are U-shaped.
The wire clamp is placed in the support frame, and the nuts and screws press the wire clamp along the long holes on the U-shaped end surfaces of the support frame. The wire clamp is composed of the upper wire clamp and the conductive sheet.
There are multiple rows of bumps on both sides of the upper wire clamp surface, and there are one or two ribs on the bumps.
It is characterized by a plurality of rows of bumps protruding from both sides of the upper surface of the conductive sheet. The bumps and the middle of the upper surface form an arc.
The middle section of the upper surface of the conductive sheet is a raised platform, and a threaded hole is formed in the center of the platform and is connected to the insulating base via bolts.
A positioning round block at each end of the lower surface of the conductive sheet is connected to the U-shaped support frame, and the two upper wire clips are placed on both sides of the conductive sheet platform and are clamped together with the conductive sheet.
The upper wire clip and the conductive piece bump (stagger each other to clamp the wire.
Provide you with the supply of pulse oximeter finger. to help you safely get back to your daily routine.
With more than 15+ yrs rich MFG experience, you can definitely trust in and cooperate with.
Our strict quality control protocol thoroughly vets every aspect of production, storage, and shipments all the way way to our end customers.
Our products include pulse Oximeter Finger, Forehead Thermometer, Automatic foam soap dispenser, etc.
Pulse Oximeter Manufacturers, oxygen saturation, oximetry
TOPNOTCH INTERNATIONAL GROUP LIMITED , https://www.mic11.com