Concrete slicer method - Huaqiang Electronic Network

product name:

Concrete slicer

First, the concrete slicer

Machine structure and principle

1

The structure of the slicer: mainly consists of three parts: the rebound single-phase machine electric, the reduction box, the grinding head body, the column, the screw, the lifting handle and the dial, and the chassis, the clamp, the anchor screw, etc. The core sample is convenient to clamp, high precision, good grinding quality, simple operation, safe and reliable.

2

Working principle: This machine relies on the plane grinding head equipped with diamond cutting tool to realize the end face grinding of concrete core sample under the condition of telling the speed. The machine adopts the circular column guide rail and the screw lifting manual feeding mode to ensure the The grinding head works smoothly and reliably.

Second, concrete slice

machine

Instructions:

1

Select the appropriate fixture according to the diameter of the core sample and firmly clamp it on the small round column.

2

Loosen the main body bolt, turn the screw lift handle, select the required size, and lock the dial.

3

Open the water inlet valve to open the water, place the splash guard and close the power switch to rotate the grinding head.

4

The hand-held main body slowly approaches the core sample and begins to grind and reciprocate several times.

5

, loosen the small round column, the ingot of the clamp, the reverse mounting piece, repeat

2

,

3

,

4

Step until the end of the core sample meets the requirements.