The high-frequency electronic ballast for the Leitz brand LT2 fluorescent lamp training station is a ballast designed for the lighting industry to perform the first and long time of the fluorescent lamp. It is especially suitable for lamps with high starting breakdown voltage, suitable for working at high frequency. 
Thin tube diameter, extra long tube.
The LT2 old-fashioned ballast is different from the general commercial electronic ballast, which can cope with various abnormal states of the lamp, and the ballast itself does not cause any abnormal phenomenon, that is, the old ballast ballast has a pole. High reliability and long-term full load operation.
The LT2 old-fashioned ballast uses the constant current characteristic of the output, so that the same type of ballast can be used for the lamp of the same lamp current, so that the user is more convenient in selecting the training station.
LT2 old-fashioned ballasts In the use of T5 series lamps, Leitz has specially designed to increase the HO output line. Using the HO line, the user can install the HE/HO lamp of the same length on the same exercise frame and use the same old-fashioned ballast. In this way, the user can reduce the equipment input cost and greatly improve the equipment utilization rate.
Leitz has years of experience in the design of electronic ballasts, and can design suitable high-performance old-fashioned ballasts according to customers' different performance lamps.
Note: LT2 table ballast experienced at high frequencies, making the experienced user station, to avoid output lead alignment, and line length is generally not more than 2 meters. To reduce the distribution effect between the output wires.
Product specifications
Special Series Special Series
LT2 series housing size chart
Electric Transmission Pole, Galvanized Electric Pole, Electrical Transmission Tower, Power Transmission Pole
YIXING FUTAO METAL COMPONENT UNIT CO.,LTD , http://www.chinasteelpole.com