Talking about the difference between photovoltaic cable and ordinary cable

Photovoltaic cables are often exposed to sunlight, and solar systems are often used under harsh environmental conditions such as high temperature and ultraviolet radiation. In Europe, sunny days will lead to solar system temperatures up to 100°C. At present, we can use various materials such as PVC, rubber, TPE and high-quality cross-linked materials, but unfortunately, rubber cables rated at 90°C, and even PVC cables rated at 70°C It is also often used outdoors. At present, the state's Golden Sun project has been launched frequently. Many contractors do not choose special cables for solar systems in order to save costs. Instead, they choose ordinary pvc cables instead of photovoltaic cables. Obviously, this will greatly affect the use of the system. life.

The characteristics of photovoltaic cables are determined by their special insulating materials and sheathing materials for cables. We call them cross-linked PEs. After irradiation accelerator irradiation, the molecular structure of the cable material will change to provide its performance in every aspect. .

Anti-mechanical load In fact, during installation and maintenance, the cable can be routed on the sharp edges of the roof structure while the cable is subjected to pressure, bending, tension, cross tensile load and strong impact. If the strength of the cable jacket is not sufficient, the cable insulation will be severely damaged, which will affect the service life of the entire cable or cause short circuit, fire and danger of personal injury.

Cross-linked materials with high mechanical strength. The cross-linking process alters the chemical structure of the polymer, converts the meltable thermoplastic material into a non-meltable elastomer material, and cross-link radiation significantly improves the thermal, mechanical, and chemical properties of the cable insulation material.