According to statistics, more than 80% of riders are used to enjoying car music or listening to radio while driving. However, some car owners will consider the price of the car, reduce the cost of the car audio, and switch to cheap and low-quality speakers, resulting in poor sound quality of the original car, can not be enjoyed. So what should we pay attention to when modifying?
Misunderstanding of today's car audio modification
Misunderstanding 1: The more speakers on the car, the better, the better the sound effect
The more speakers, the better the sound. This is a big misunderstanding that many riders nowadays generally believe, but it is not. There is no proportional relationship between the number of speakers and the effect of sound quality in the sound. The number of speakers is fine rather than more. As long as the positions of the individual speakers are correct, the sound quality will naturally come out, and the speakers will only destroy the effect of the entire sound field.
Misunderstanding 2: According to the original parking space of the car, the modification does not leave traces.
Please tell us what is the modification? Change is the meaning of change and change. In particular, some cars now have no high-pitched sounds. Can we just change the car subwoofer? Obviously this is impossible. The most common modification method now is that in order to get a better sound field effect, the treble is usually cast on the A-pillar. Because the treble is very directional, and the penetration is weak, the treble is modified. It is necessary on the A-pillar. In fact, the current store is basically responsible for the owner of the mold, because the pair of A-pillars will take at least 6 hours, and the technology will be relatively high, and the modified store will make the sound system more A good performance is to recover only the material cost. At this point I think it is very good. The true spirit of Lei Feng has not been written in the diary.
Myth #3: How long does it take to install? 1 day? Time is too long
The modification time is too long, I believe this is the "excuses" that most people often encounter. In fact, the masters of the car audio modification industry are really too hard, because the time given by the owner is not enough, the modification process is not good, and there is no way to do it. Even the simplest wiring under the pressure of time constraints, I believe that the masters want to get better, it is not enough. Therefore, it is recommended that you give the master enough time to install the sound.
Myth 4: My original car's sound quality is very good, my original car horn sounds very good
As everyone knows, no matter what car, it sells the car itself, there is a comfortable Mercedes-Benz car that sells in the car, a BMW car that sells driving stimuli, a Volvo that sells safely, etc., but no car is saying The sound in the car is very good. Therefore, in order to have a good sound effect, modification is a must. So how do you modify it? Please change it according to your own personal needs. Because we are going to play the sound, not the sound. Don't listen to what people are blowing, know that no matter what you want, you only have to buy the right ones, not the expensive ones.
Misunderstanding 5: Can you not do sound insulation?
Can't you do sound insulation? Regarding the sound insulation, some people think that the effect is not great, and some people think it is necessary. And I think that a good sound has a lot to do with soundproofing. In fact, everyone knows that the same set of speakers is good in the audition cabinet. How do you get into the car and change it completely? Tell everyone that the answer lies in the speaker problem. The sound is made to make the door panel close to the sound. Because the sound is emitted by vibration, the car does not make sound insulation. When the sound is turned on, the speaker vibrates, and the iron of the car is also vibrating. This will offset a lot of low frequency, and the effect of the sound will naturally be greatly reduced.
If you want to operate on your car, then of course you should study the most basic car audio modification knowledge.
First, change the sound according to the model, see how other people change the same model, how should they be, everyone likes the different styles of music, others change the frequency of the style, grades may not be suitable for themselves, and then the car is not able to understand the sound, only The people in the car know how to enjoy music.
Second, blindly believe that high-profile brands, especially the well-known brands of the Internet, most of them are business hype, but not blindly according to the network package configuration, I have tried it, and listened to it.
Third, network or electricity communication, you will be given a matching program (especially vowed to be very professional), the vast majority of pure business practices, just selling audio instead of changing the sound according to your requirements.
A flexible printed circuit board is a type of PCB designed to meet the needs of flexible electronic circuits. Originally designed flexible printed circuits to replace traditional wiring harnesses.
Flexible printed circuits are produced using flexible laminates. The flexible laminate holds the conductive foil as well as the dielectric substrate. Flexible circuit boards can be three-dimensionally routed and can be appropriately shaped to fit the available space.
Flexible PCB,Flexible Circuit Board,PCB Production Process,PCB Process Technology,Circuit Board Manufacturing Process
Huizhou Liandajin Electronic Co., Ltd , https://www.ldjpcb.com