On March 3, Elon Musk was holding the grand ambition to build a spaceship to send people to the moon, but at the same time, he did not forget to listen to the opinions of "fans."
A fifth-grade girl has received a positive response from the Tesla and SpaceX CEO, who previously sent a letter to Musk, suggesting that he should host a self-made commercial advertising contest. .
"I noticed that you didn't advertise." The little girl named Bria wrote in her letter that her father was a journalist for the automotive industry. She said that she had a lot of conversations with Tesla about her father. 
“Many people make homemade commercials, many of which are very good, professional and entertaining. So I think you should have a big competition to see who can make the best homemade Tesla. Commercial advertising, the winner's advertisement will be broadcast," Bulia wrote.
Brian’s father posted a Twitter message for this. He wrote: “@elonmusk Elon, my daughter wrote a letter to you for a school project and sent it to Tesla, but I think I should post it here. Thank you very much!"
Until now, Tesla has chosen not to advertise, allowing the product itself and its drivers to prove their worth. “Traditionally we will avoid investing in marketing costs,†Tesla wrote on his “Marketing Strategy†website.
However, Musk has expressed his appreciation for Brian's suggestion. In his reply to his father, he wrote: "Thank you for writing this letter so cutely. This sounds like a great idea, we will do it. of!"
Brian said she wants to be a politician when she grows up, but if she is interested in pursuing a career in the marketing field, then there is already a good beginning.
microwave PCB
microwave PCB`s is a type of PCB designed to operate on signals in the megahertz to gigahertz frequency ranges (medium frequency to extremely high frequency). These frequency ranges are used for communication signals in everything from cellphones to military radars. The materials used to construct these PCB`s are advanced composites with very specific characteristics for dielectric constant (Er), loss tangent, and CTE (co-efficient of thermal expansion).
High frequency circuit materials with a low stable Er and loss tangent allow for high speed signals to travel through the PCB with less impedance than standard FR-4 PCB materials. These materials can be mixed in the same Stack-Up for optimal performance and economics.
The advantages of using materials with a low X, Y and Z CTE is a resulting PCB structure that will remain extremely stable in high temperature environments while operating at up to 40 GHz in analog applications. This allows for the effective placement of very fine pitch components including, in some cases, bare die-attach. Additionally, the low CTE materials will facilitate the alignment of multiple layers and the features they represent in a complex PCB Layout.
Features
.CTEr = +40/+50 ppm per °C (low); Tg (glass transition temperature) is 280°C
.ER = 3.38/3.48 at 10.0 GHz
.ER is constant to 40.0 GHz
.ED (electro-deposited) copper only
.Layer-to-layer thickness control = +/- 0.001
.Fabrication costs are typical to slightly increased
Microwave PCB,Microwave Frequency PCB,Bare Copper Microwave PCB,High Frequency PCB
Storm Circuit Technology Ltd , http://www.stormpcb.com