LBH-10(20)
Automatic mixing material mixer
Mixer mixer
Mixer mixer manufacturer
Automatic mixing machine
Is preparing asphalt
——
Sand mix or cement——
An essential mixing machine for sand and gravel samples. Fully meet the standards of the Ministry of CommunicationsJTJ053-93
"Test procedures for asphalt and asphalt mixtures for highway engineeringâ€
The provisions of the regulations.
Currently
It has been widely used in the laboratory of the research, construction and supervision departments of highway systems.
Automatic mixing machine
Operating procedure
1
,
Turn on the power and pre-mix the mixing time and heating temperature as needed.
2
,
Press the up button to raise the mixing head to the highest position and pour the preheated mixture into the pot.
3
,
Press the down button and the mixer will automatically drop to the lowest position.
4
,
Press the start button and the stirrer starts working.
5
,
After the stirring is completed, the stirring head is raised to the highest position and the pot position is inverted.
90o
, the mixture is taken out.
6
,
Wipe the asphalt residue or dirt on the heating pan, slide and agitating slurry.
Companies adhering to the "after-sales service for the extension of product quality, depending on product quality for the life of the enterprise", under the guarantee of networked after-sales service management system, to provide users with the highest quality products and services.
This series high power density programmable DC Electronic Load provides three voltage ranges 200V DC Electronic Load System/600V DC Electronic Load System/1200V DC Electronic Load System. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Complete protection includes OCP, OPP, OTP, over voltage and reverse alarm. Supports list function. RS232, RS485 and USB is the standard communication interfaces. LAN&GPIB communication card is optional. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.Additionally, it can also work in single unit in 200V DC Electronic Load /600V DC Electronic Load/1200V DC Electronic Load.
Speical features as below:
â— Flippable front panel and color touch screen allow convenient access and operation
â— Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
â— Adjustable current slew rate, adjustable CV loop speed
â— Ultra high precision voltage & current measurement
â— 50kHz high-speed CC/CR dynamic mode
â— 500kHz high-speed voltage and current sampling rate
â— Timing & discharging measurement for batteries
â— Short circuit test mode
â— Auto mode function provides an easy way to do complicated test
â— V-monitor/I-monitor
â— Full protection: OCP, OPP, OTP, over voltage and reverse alarm
â— Front panel USB interface supports data import and export
â— Using standard SCPI communication protocol
â— Smart fan control with lower noise and better for environment
DC Electronic Load System,electronic DC load,itech dc load
APM Technologies Ltd , https://www.apmpowersupply.com