In April 2018, the province's electricity operation in the province was stable. The main conditions are as follows:
First, the power generation situation
In April 2018, the province's power generation was 10.35 billion kWh, a year-on-year decrease of 1.19%, of which: hydropower generation was 3.56 billion kWh, a decrease of 32.37%; thermal power generation was 5.95 billion kWh, an increase of 28.16%; wind power generation was 640 million kWh, an increase 15.65%; new energy power generation was 1.11 billion kWh, an increase of 40.74%.
In April 2018, electricity purchases from the province were 1.91 billion kWh, an increase of 74.30%.
From January to April 2018, the province's power generation was 44.25 billion kWh, an increase of 1.31% year-on-year, of which: hydropower generation was 11.23 billion kWh, a decrease of 34.50%; thermal power generation was 30.49 billion kWh, an increase of 23.18%; wind power generation was 2.03 billion kWh. , an increase of 18.01%; new energy generation of 3.48 billion kWh, an increase of 36.01%.
From January to April 2018, electricity purchases from the province were 8.25 billion kWh, an increase of 91.60%.
Second, the use of electricity
In April 2018, the province's total electricity consumption was 12.47 billion kWh, a year-on-year increase of 6.25%. Among them, industrial electricity consumption was 6.67 billion kWh, an increase of 14.39%. The first industry used electricity of 0.1 billion kWh, an increase of 93.99%; the second industry used 6.80 billion kWh, an increase of 13.35%; the tertiary industry used 2.32 billion kWh, a decrease of 0.19%; urban and rural residents lived 3.34 billion kilowatts of electricity. When, reduce by 2.04%.
From January to April 2018, the province's total electricity consumption was 54.42 billion kWh, a year-on-year increase of 9.27%. Among them, industrial electricity consumption was 21.68 billion kWh, an increase of 5.16%. The electricity consumption of the primary industry was 430 million kWh, an increase of 11.41%; the electricity consumption of the second industry was 26.91 billion kWh, an increase of 5.22%; the electricity consumption of the tertiary industry was 10.06 billion kWh, an increase of 14.90%; the electricity consumption of urban and rural residents was 17.02 billion kW. At the time, it increased by 12.82%.
We provide quick-turn injection molding by many types of materials, like ABS, PA66, PBT, TPU, TPE, PVC, PE, NYLON 6, PC, silicone, TPE, EPDM, PUR, etc. Special for some plastic parts. Our advantages in internal prototyping, bridge tooling and short-run manufacturing, which can eliminate the costly and time-consuming for customers a lot.
ETOP experienced to support one-stop cable assembly solution service, including wire harness, palstic enclosure, silicone, metal, PCBA, etc.
Injection Molding Parts,Plastic Injection Molding,Low Cost Plastic Injection Molding,Plastic Mold Injection Molding
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com